Dismantling Joints Manufacturer

Ms Dismantling Joints

Dismantling Joints play a decisive role in the design and layout of pipelines and valves. They are an essential aid during the installation and removal of pipe sections and valves.

learn more
Anant Engineers

Introduction

M/s. Anant Engineers & Fabricators is one of the leading Manufacturing Company in Water supply Pipe line accessories in India.

learn more
Our Associates

Our Associates

WE ARE ASSOCIATED FIRM THE DETAILS OF OUR FIRMS AS GIVEN BELOW.

learn more
Dismantling Joints Installation

Dismantling Joints Installation

Check the DJ400 parts to ensure no damage occurred during transit and that no parts are missing.

learn more
Dismantling Joint Manufacturer

Design Principle

The flange adaptor is located on one side of the dismantling joint. It is connected securely to the pipe or valve via the flange.

learn more


Manufacturing Facilities
 
 
WorkShop Details
• Shop Floor - Total Area Of Shop Floor is 1500 SQ. MTR. With Fully Cover and Trimix Conkrit With Walk way and Machin Location Mark
• Office Building - Total Area 200 SQ. MTR. With Fully Furnish With All Minumum office Equipments
• Store Room - Area 50 SQ. MTR. With Racks and Storage Systyms for Consumables
 
Manufacturing Facilities
• Work Shop Place with Machines Equipments.
• Area of Plot 2100 SQ. MTR. (Built-up shed with H.O.T. Gantry)
• Workshop 300 SQ. MTR.
• Machine shop 200 SQ. MTR.
 

Lathe Machine
Lathe Machine
Make B. Parmar. (LM01)
Electric Parameter
 • Motor 7.5 HP.
 • Motor Auto 1HP.
Mechanical Parameter
 • Center Height 1.75 Mtr.
 • M/C Height 2.560 Mtr.
 • Length 4.400 Mtr.
 • Width 3.310 Mtr.
 • Length of M/c Job 1.5 Mtr.

Lathe Machine
Lathe Machine
Make B. Parmar. (LM01)
Electric Parameter
 • Motor 12.5 HP.
Mechanical Parameter
 • Center Height 1.75 Mtr.
 • M/C Height 2.560 Mtr.
 • Length 4.400 Mtr.
 • Width 3.310 Mtr.
 • Length of M/c Job 1.5 Mtr.

Hydraulic Press M/C
Hydraulic Press M/C
Electric Parameter
 • Motor 10 HP.
 • Make Electro.
Mechanical Parameter
 • Capacity 100 Mt.
 • Maximum Dia Dish end 3 Mtr.

VTL Machine
VTL Machine 
Model 3 M VTL (VTL01)
Electric Parameter
 • Main Motor Table Drive - 30 HP
 • Automatic Lifting & Lower of cross Rail Motor - 3 HP
 • Vert /Horz Feed of Ram Slide Motor - 3 HP
 • VFD Drive
 • DRO- Electronica
Mechanical Parameter
  •  • Table Diameter - 3000mm.
  •  • Turning Diameter - 3500mm
  •  • Working Height cross Rail-2000mm
  •  • Vertical travel of Ram Head-1200mm
  •  • Swivel Angle of Ram Head - 45º
  •  • Table Speed - 1.5 to 15 Rpm

VTL Machine
Drilling Machine 

Electric Parameter
 • Drilling Machine
 • Spindle Moter 1.5 hp
Mechanical Parameter
  •  • M/C Height 2.560 Mtr.
     • Length 2450.
     • Bed Length 1 Mtr.
     • Driling Diameter 65mm

Bending Machine
Bending Machine 

Electric Parameter
 • Make
Mechanical Parameter
  •  • Length - 2000mm
     • Minumim Dia. 700mm
     • Thickness - 35mm
     • Hydraulic Oprated
     • DRO For Roller Position
     • PLC Control

Saw Welding Machine And Positioner
Saw Welding Machine And Positioner 

Electric Parameter
 • Arc Power Control Pune Thyristor Based 40hp
 • Capacity Turn Table Motoer 5 hp
Mechanical Parameter
  •  • Current Capacity 800 Amp Wire Size 2mm
     • 3.1mm Turn Table max Dia. of Job 2500mm

Lathe Machine With Medium Bed (LM03)
Lathe Machine With Medium Bed (LM03)

Electric Parameter
 • Lathe Machine With Medium Bed (LM03)
Mechanical Parameter
  •  • Center Height 1.68 Mtr.
  •  • M/C Height 1.68 Mtr.
  •  • Length 6.230 Mtr.
  •  • Width 3.310 Mtr.
  •  • Length of M/c Job 1.0 Mtr.

Radial Drill M/C Small
Radial Drill M/C Small

Electric Parameter
 • 2 HP Motor make National Engineering
Mechanical Parameter
  •  • M/C Height 330.
  •  • Length 260.
  •  • Width 260.
  •  • M/C Capacity 32 mm.

Pug Cutting M/C Make ESAB
Pug Cutting M/C Make ESAB

Electric Parameter

Mechanical Parameter
  •  • Cutting Capacity 200mm (MS)
  •  • Circle Min. Dia. 400mm

Hydro Testing Machine (Electric)
Hydro Testing Machine (Electric)

Electric Parameter
  •  • Motor 2.2 HP. Make Jyoti Elect.

Mechanical Parameter
  •  • Capacity 60Kg/cm2

HOT Crane No-1
HOT Crane No-1

Electric Parameter
  •  • Hoist Electric 2 Ton SWL No 4215
    Make Crane 'O' Mech. Engg.

Mechanical Parameter
  •  • Capacity 2 Ton
  •  • Cross Travel 7.72 Mtr.
  •  • Lift 3.550 Mtr.

HOT Crane No-1
HOT Crane No-2/1

Electric Parameter
Mechanical Parameter
  •  • Capacity 3 Ton
  •  • Cross Travel 8.60 Mtr.
  •  • Lift 3.400 Mtr.
  •  • Long Travel 24.150

HOT Crane No-1
HOT Crane No-2/2

Electric Parameter
  •  • Hoist Electric 2 Ton Crane 'O' Mech. Engg.
Mechanical Parameter
  •  • Capacity 3 Ton
  •  • Cross Travel 8.60 Mtr.
  •  • Lift 3.400 Mtr.
  •  • Long Travel 24.150

OVEN
OVEN

Electric Parameter
  •  • Temp - 350 - 370°C
  •  • Range - 70 V
  •  • Capacity 2 Kgs.
Mechanical Parameter
  •  • M/C Height 330.
  •  • Length 260.
  •  • Width 260.


Welding M/C No - 1 Swastik Make
Welding M/C No - 1 Swastik Make

Electric Parameter
  •  • HP Capacity 9.5
  •  • Current Capacity 400 AMP.
Mechanical Parameter
  •  • M/C Height 490.
     • Length 610.
     • Width 320.
     • Current Capacity 400 AMP
     • ARC welding Inverter MMA4003

Welding M/C No - 2 Warpp Make
Welding M/C No - 2 Warpp Make

Electric Parameter
  •  • HP Capacity 9.5
  •  • Current Capacity 400 AMP
Mechanical Parameter
  •  • M/C Height 570.
     • Length 650.
     • Width 310.
     • Current Capacity 400 AMP

Welding M/C No.-3 Warpp Make
Welding M/C No.-3 Warpp Make

Electric Parameter
  •  • HP Capacity 9.5
  •  • Current Capacity 400 AMP
Mechanical Parameter
  •  • ARC welding Inverter MMA4003
  •  • M/C Height 570.
  •  • Length 650.
  •  • Width 310.
  •  • Current Capacity 400 AMP

Welding M/C No.-3 Warpp Make
Grinder 7" No 1 & 2
Grinder 7" No 3 & 4
Grinder 7" No 5
Grinder 5" No 1 & 2
Sander 7"

Electric Parameter
  •  • KPT make
  •  • Ideal make
  •  • Boss make Fiber Body
  •  • Ideal make
  •  • KPT Make
Mechanical Parameter
  •  • ARC welding Inverter MMA4003
  •  • M/C Height 570.
  •  • Length 650.
  •  • Width 310.
  •  • Current Capacity 400 AMP